SNKRS Location Spoofing Guide (iOS)

This guide outlines best practices for spoofing your location for the SNKRS app on iOS devices and using desktop-based location tools. Following these steps carefully helps ensure the spoofed location

🚨Note: Methods and reliability may vary depending on iOS version and tool updates.

Prerequisites

• iOS device compatible with your spoofing software

• Desktop or laptop (Windows or macOS)

• Supported location spoofing tool (e.g., iAnyGo / 3UTOOLS / AYCD IOS)

• Latest version of the SNKRS app installed

---

Step-by-Step Instructions

1. Update the SNKRS App

Before spoofing, ensure the SNKRS app is fully updated from the App Store. Outdated versions may not reflect location changes correctly.

---

2. Connect Your Device

• Plug your iPhone into your laptop or PC.

• When prompted on your phone, select “Trust This Device.”

• If you do not trust the device, any location changes made on the computer will not apply to your phone.

---

3. Set the Spoofed Location

• Open your spoofing software.

• Enter the desired coordinates or address.

• Apply the location change.

---

4. Verify Location Change

• Open Apple Maps on your iPhone.

• Confirm that your current location reflects the spoofed coordinates.

• To get coordinates for your location you can go to gps-coordinates.net

• Do not proceed until the spoofed location is verified.

---

5. Maintaining the Spoofed Location

• You may unplug your device after spoofing.

• The spoofed location will remain active as long as the device is not restarted.

• Restarting the phone will reset the location back to its real/default position.

---

Troubleshooting

Location Does Not Update

If the location does not change after entering coordinates:

• Interact with the small map inside the spoofing tool.

• Click or drag slightly around the target area.

• This sends additional location update requests to the device and often forces the spoof to apply correctly.

---

Important Notes

• Restarting your phone will always reset your location.

• Always double-check your location in Apple Maps before opening SNKRS.

• Tool behavior may differ across iOS versions—what works on one version may not work on another.

---

Best Practices

• Spoof your location before opening the SNKRS app.

• Avoid unnecessary device restarts.

• Keep spoofing tools and SNKRS updated to the latest versions.

---

iAnyGo Guide (Location Spoofing for SNKRS)

Desktop: Navigate to https://www.ianygo.com/ and download the application IOS Device Setup: https://www.tenorshare.net/guide/ianygo-ios-assistant.html Step 1: Connect Your Device

1. Open iAnyGo on your computer.

2. Connect your iPhone to the computer using a USB cable.

3. Unlock your phone and tap “Trust This Computer” if prompted.

4. Click Connect now and select General Mode

---

Step 2: Select Location Mode

1. On the main screen, select Change Location mode.

2. A map interface will appear.

Step 3: Enter the Spoof Location

1. Enter the desired address or coordinates (SNKRS Pass / SNKRS Stash location).

2. Confirm the location on the map.

---

Step 4: Apply Location

1. Click Start to Modify

2. Wait for confirmation that the location has been changed and check your maps on your phone.

How it looks on mobile ⬇️

---

Step 5: Open SNKRS

1. Keep iAnyGo running in the background.

2. Open the SNKRS app on your iPhone

3. Navigate to the SNKRS Pass or SNKRS Stash drop.

---

3UTOOLS

What Is the 3uTools Toolbox and Its Purpose?

The 3uTools Toolbox is an application used for location spoofing during SNKRS drops that require it, such as SNKRS Pass and SNKRS Stash drops that don't have Bluetooth enabled..

---

Why Use 3uTools for Spoofing?

Spoofing your iPhone’s location can be useful for accessing geolocation-restricted events, such as SNKRS Passes, SNKRS Stashes, and similar location based releases.

3uTools serves as a reliable alternative to other spoofing tools, many of which require paid subscriptions or frequent updates. With 3uTools, users can achieve the same functionality at no cost and with minimal maintenance.

---

How to Get Started

Setup Instructions

• Navigate to http://www.3u.com/ and download the application

• Install the software on your Windows or Mac PC

• Launch the application after installation is complete

• Verify that iTunes and the required iTunes drivers are installed on your system

• Enable Developer Mode go to Settings on the device. Scroll down to Privacy & Security, then go down to Developer Mode. Click on that and Enable Developer Mode. It will prompt you to restart your device. .

• After you restart, you will receive a confirmation prompt to confirm that you want to Turn On Developer Mode before being asked to enter your passcode.You will be ready to proceed once you see your device show up in Spoof without any errors

• Connect your iPhone to the PC using a USB cable

• If the device is not recognized, follow the on-screen diagnostic prompts to troubleshoot

• Once the device is detected, proceed to the Toolbox section within the application

Step 1: Click ToolBox

Step 2: Click Virtual Location

Step 3: Enter the latitude and longitude values for your desired location in the fields below.

For this example, we will use NikeLab, located at 21 Mercer Street, New York City, NY:

• Latitude: 40.720830

• Longitude: -74.002120

Step 4: Once the coordinates are entered, click Modify Immediately to apply the change.

Step 5: That’s it! Your virtual location is now set.

Important Notes

• If your iPhone is not detected, complete all available diagnostic steps within the application before contacting a staff member or submitting a support ticket.

• Always verify that spoofing was successful by checking your location in your Maps app.

• To revert back to your actual location, simply restart your iPhone and toggle developer mode off.

AYCD

• Click HERE to view the full guide.

• AYCD has discontinued official support for spoofing, so it is no longer actively maintained. It only works on iOS, and at the moment, it may work for some users but not for all.